 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Bulletin PD-21071 rev. A 12/06 30CTH02SPbF 30CTH02-1PbF Hyperfast Rectifier Features * * * * * Hyperfast Recovery Time Low Forward Voltage Drop Low Leakage Current 175C Operating Junction Temperature Lead-Free ("PbF" suffix) trr =30ns max. IF(AV) = 30Amp VR = 200V Description/ Applications International Rectifier's 200V series are the state of the art Hyperfast recovery rectifiers specifically designed with optimized performance of forward voltage drop and hyperfast recovery time. The planar structure and the platinum doped life time control, guarantee the best overall performance, ruggedness and reliability characteristics. These devices are intended for use in the output rectification stage of SMPS, UPS, DC-DC converters as well as free-wheeling diode in low voltage inverters and chopper motor drives. Their extremely optimized stored charge and low recovery current minimize the switching losses and reduce over dissipation in the switching element and snubbers. Absolute Maximum Ratings Parameters VRRM IF(AV) IFSM TJ, TSTG Peak Repetitive Reverse Voltage Average Rectified Forward Current @ TC = 159C Per Diode Per Device Non Repetitive Peak Surge Current @ TJ = 25C Operating Junction and Storage Temperatures Max 200 15 30 200 - 65 to 175 Units V A C Case Styles 30CTH02SPbF 30CTH02-1PbF Base Common Cathode 2 Base Common Cathode 2 1 Anode 2 Common Cathode 3 1 Anode Anode 2 Common Cathode 3 Anode D2PAK www.irf.com TO-262 1 30CTH02SPbF, 30CTH02-1PbF Bulletin PD-21071 rev. A 12/06 Electrical Characteristics @ TJ = 25C (unless otherwise specified) Parameters VBR, Vr VF Breakdown Voltage, Blocking Voltage Forward Voltage Min Typ Max Units Test Conditions 200 V V V A A pF nH IR = 100A IF = 15A, TJ = 25C IF = 15A, TJ = 125C VR = VR Rated TJ = 125C, VR = VR Rated VR = 200V Measured lead to lead 5mm from package body 0.92 1.05 0.78 0.85 5 57 8 10 300 - IR Reverse Leakage Current - CT LS Junction Capacitance Series Inductance - Dynamic Recovery Characteristics @ TC = 25C (unless otherwise specified) Parameters trr Reverse Recovery Time Min Typ Max Units Test Conditions 26 40 2.8 6.0 37 120 35 30 nC A ns IF = 1A, diF/dt = 50A/s, VR = 30V IF = 1A, diF/dt = 100A/s, VR = 30V TJ = 25C TJ = 125C TJ = 25C TJ = 125C TJ = 25C TJ = 125C IF = 15A diF/dt = 200A/s VR = 160V IRRM Peak Recovery Current - Qrr Reverse Recovery Charge - Thermal - Mechanical Characteristics Parameters TJ TStg RthJC Max. Junction Temperature Range Max. Storage Temperature Range Thermal Resistance, Junction to Case Weight Mounting Torque Marking Device Per Diode Min - 65 - 65 6.0 5.0 Typ 2.0 0.07 - Max 175 175 1.1 12 10 Units C C/W g (oz) Kg-cm lbf.in 2 30CTH02S 30CTH02-1 Case style D Pak Case style TO-262 2 www.irf.com 30CTH02SPbF, 30CTH02-1PbF Bulletin PD-21071 rev. A 12/06 100 ( A) 100 Tj = 175C 10 1 0.1 0.01 0.001 150C 125C 100C 75C 50C 25C Instantaneous Forward Current - I Tj = 175C Tj = 125C Reverse Current - I F (A) R 0.0001 0 50 100 150 200 Reverse Voltage - VR (V) Fig. 2 - Typical Values of Reverse Current Vs. Reverse Voltage 10 Tj = 25C 1000 (pF) T J = 25C Junction Capacitance - C T 100 1 0.4 10 0.6 0.8 1 1.2 1.4 1.6 0 50 100 150 200 Forward Voltage Drop - VFM (V) Fig. 1 - Typical Forward Voltage Drop Characteristics Reverse Voltage - VR (V) Fig. 3 - Typical Junction Capacitance Vs. Reverse Voltage 10 (C/W) thJC Thermal Impedance Z 1 D = 0.50 D = 0.20 D = 0.10 D = 0.05 D = 0.02 D = 0.01 Notes: PDM t1 t2 0.1 Single Pulse (Thermal Resistance) 1. Duty factor D = t1/ t2 2. Peak Tj = Pdm x ZthJC + Tc 0.01 0.00001 0.0001 0.001 0.01 0.1 1 t1, Rectangular Pulse Duration (Seconds) Fig. 4 - Max. Thermal Impedance Z thJC Characteristics 10 www.irf.com 3 30CTH02SPbF, 30CTH02-1PbF Bulletin PD-21071 rev. A 12/06 180 Allowable Case Temperature (C) Average Power Loss ( Watts ) 25 20 15 10 5 0 0 5 10 15 20 (A) F(AV) 170 DC RMS Limit 160 Square wave (D = 0.50) 150 Rated Vr applied see note (2) DC D = 0.01 D = 0.02 D = 0.05 D = 0.1 D = 0.2 D = 0.5 140 25 Average Forward Current - I 0 Average Forward Current - IF(AV) (A) 5 10 15 20 25 Fig. 5 - Max. Allowable Case Temperature Vs. Average Forward Current Fig. 6 - Forward Power Loss Characteristics 100 IF = 15 A 1000 IF = 15 A Qrr ( nC ) V R = 390V T J = 125C T J = 25C trr ( ns ) 100 V R = 390V T J = 125C T J = 25C 10 100 1000 10 100 1000 di F /dt (A/s ) Fig. 7 - Typical Reverse Recovery vs. di F /dt di F /dt (A/s ) Fig. 8 - Typical Stored Charge vs. di F /dt (2) Formula used: TC = TJ - (Pd + PdREV) x RthJC ; Pd = Forward Power Loss = IF(AV) x VFM @ (IF(AV) / D) (see Fig. 8); PdREV = Inverse Power Loss = VR1 x IR (1 - D); IR @ VR1 = rated VR 4 www.irf.com 30CTH02SPbF, 30CTH02-1PbF Bulletin PD-21071 rev. A 12/06 Reverse Recovery Circuit VR = 200V 0.01 L = 70H D.U.T. dif/dt ADJUST diF /dt D G IRFP250 S Fig. 9- Reverse Recovery Parameter Test Circuit 3 IF 0 trr ta tb 4 Q rr 2 I RRM 0.5 I RRM di(rec)M/dt 0.75 I RRM 5 1 diF /dt f 1. diF/dt - Rate of change of current through zero crossing 2. IRRM - Peak reverse recovery current 3. trr - Reverse recovery time measured from zero crossing point of negative going IF to point where a line passing through 0.75 IRRM and 0.50 IRRM extrapolated to zero current 4. Qrr - Area under curve defined by t rr and IRRM t rr x I RRM Q rr = 2 5. di (rec) M / dt - Peak rate of change of current during t b portion of t rr Fig. 10 - Reverse Recovery Waveform and Definitions www.irf.com 5 30CTH02SPbF, 30CTH02-1PbF Bulletin PD-21071 rev. A 12/06 Outline Table Conform to JEDEC outline D2Pak (SMD-220) Dimensions in millimeters and (inches) Modified JEDEC outline TO-262 Dimensions in millimeters and (inches) 6 www.irf.com 30CTH02SPbF, 30CTH02-1PbF Bulletin PD-21071 rev. A 12/06 Tape & Reel Information Dimensions in millimeters and (inches) Part Marking Information D2PAK THIS IS A 30CTH02S LOT CODE 8024 ASSEMBLED ON WW 02, 2000 INTERNATIONAL RECTIFIER LOGO ASSEMBLY LOT CODE PART NUMBER 30CTH02S DATE CODE YEAR 0 = 2000 WEEK 02 P = LEAD-FREE TO-262 THIS IS A 30CTH02-1 LOT CODE 8024 ASSEMBLED ON WW 02, 2000 INTERNATIONAL RECTIFIER LOGO ASSEMBLY LOT CODE PART NUMBER 30CTH02-1 DATE CODE YEAR 0 = 2000 WEEK 02 P = LEAD-FREE www.irf.com 7 30CTH02SPbF, 30CTH02-1PbF Bulletin PD-21071 rev. A 12/06 Ordering Information Table Device Code 30 1 C 2 T 3 H 4 02 5 S 6 TRL PbF 7 8 1 2 3 4 5 6 7 6 8 - Current Rating (30A) C T H S = Common Cathode = TO-220, D2Pak = Hyperfast Rectifier = D2Pak Voltage Rating (02 = 200V) -1 = TO-262 none = Tube (50 pieces) TRL = Tape & Reel (Left Oriented, for D 2PAk package) TRR = Tape & Reel (Right Oriented, for D2PAk package) - none = Standard Production PbF = Lead-Free Data and specifications subject to change without notice. This product has been designed and qualified for Industrial Level and Lead-Free. Qualification Standards can be found on IR's Web site. IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245, USA Tel: (310) 252-7105 TAC Fax: (310) 252-7309 Visit us at www.irf.com for sales contact information. 12/06 8 www.irf.com |
Price & Availability of 30CTH02STRLPBF
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |